Gaussian Wavelet Schemes in RegiStax 6Home

Gaussian wavelets are a feature of RegiStax that are good for enhancing images.  They have become more complex in Version 6 so that indicating them in the captions of my pictures has become quite difficult.  However I am unlikely to devise more than a few schemes, so I present a table of them here and then refer to them in the captions by their numbers.  To start with, at least, they are based on Scheme 1 which was used by way of example by Paul Maxson in his description of RegiStax 6.  I use a factor of zero to indicate that the layer is disabled by removing the check mark on the left-hand side.

Scheme 1
WaveletDenoiseSharpenFactor
10.10 0.07100 
20.15 0.10100 
30.44 0.10100 
rest0.10 0.10
1a is as above but with W1 sharpen = 0.15

Scheme 3
WaveletDenoiseSharpenFactor
10.10 0.18
20.15 0.1050 
30.44 0.10100 
40.10 0.1050 
rest0.10 0.10


Scheme 5
WaveletDenoiseSharpenFactor
10.50 0.10100 
20.50 0.10100 
30.44 0.10100 
rest0.10 0.10




Scheme 7
WaveletDenoiseSharpenFactor
10.10 0.07100 
20.15 0.1075 
30.44 0.10100 
rest0.10 0.10
7a is as above but with W1 sharpen = 0.11
7b is as 7a but with W2 sharpen = 0.15


Scheme 9
WaveletDenoiseSharpenFactor
10.10 0.07100 
20.15 0.10100 
30.44 0.10100 
40.10 0.10100 
rest0.10 0.10



Scheme 11
WaveletDenoiseSharpenFactor
10.10 0.07100 
20.15 0.15100 
30.44 0.15100 
40.10 0.15100 
rest0.10 0.10



Scheme 13
WaveletDenoiseSharpenFactor
10.25 0.21100 
20.20 0.21100 
30.10 0.15100 
rest0.10 0.10
Scheme 2
WaveletDenoiseSharpenFactor
10.10 0.07100 
20.15 0.1050 
30.44 0.10
rest0.10 0.10


Scheme 4
WaveletDenoiseSharpenFactor
10.15 0.2580 
20.10 0.1180 
30.10 0.10
rest0.10 0.10
Scheme 4a has Wavelet 1 Denoise = 0.4


Scheme 6
WaveletDenoiseSharpenFactor
10.50 0.10100 
20.50 0.10100 
30.44 0.10100 
40.10 0.1050 
rest0.10 0.10



Scheme 8
WaveletDenoiseSharpenFactor
10.50 0.10100 
20.15 0.10100 
30.44 0.10100 
rest0.10 0.10100 




Scheme 10
WaveletDenoiseSharpenFactor
10.15 0.1180 
20.10 0.11100 
30.10 0.10100 
40.10 0.10100 
rest0.10 0.10
10a is as above but with W2 sharpen = 0.15


Scheme 12
WaveletDenoiseSharpenFactor
10.15 0.35100 
20.10 0.11100 
30.10 0.10100 
rest0.10 0.10
 			Home    Back to DSOs